Settling velocity increases with
A. Specific gravity of solid particles
B. Size of particles
C. Depth of tank
D. Temperature of liquid
Answer: Option C
A. Specific gravity of solid particles
B. Size of particles
C. Depth of tank
D. Temperature of liquid
Answer: Option C
The distribution mains are designed for
A. Maximum daily demand
B. Maximum hourly demand
C. Average daily demand
D. Maximum hourly demand on maximum day
Sewage treatment units are designed for
A. Maximum flow only
B. Minimum flow only
C. Average flow only
D. Maximum and minimum flow
A. 4.5 to 6.0
B. 6.5 to 8.0
C. 8.5 to 10.0
D. 10.5 to 12.0
Settling velocity depends mainly on particle size, specific gravity, and liquid properties (such as viscosity/temperature). It does not depend on the depth of the settling tank.
✅ Correct answer: B) Size of particles
Why?
Settling velocity is strongly dependent on particle size. For small particles under Stokes' law:
[
V_s propto d^2
]
where (d) = particle diameter.
So, larger particles settle faster → higher settling velocity.
A) Specific gravity → also affects settling velocity, but in this MCQ the standard answer is particle size.
B) Size of particles → ✅ Correct
C) Depth of tank → does not directly determine settling velocity.
D) Temperature → affects viscosity and therefore can affect settling, but it is not the primary factor here.
👉 Answer: B) Size of particles
Option A,B and D are correct, pls change the question. Settling velocity does not increases with depth of the tank.
I think question is like this:settling velocity does not increase with...
There is no relation with depth, wrong answer
Size of particles pe depend kregi I think
Wrong answer
Settling velocity is directly proportional to diameter of the particle & Sp Gravity of the particle...There is no relation with the depth ..So plz correct the ans...
B should be the answer, please correction the answer
A,B and D..
All ans is correct except C..
Vs=(G-1)YD²/18ú
Ans will be size of particle
Settling velocity has no relation with the depth,, but is directly related with specific area of the tank
Except c all 3 are hold good for the question
Option a & b holds good for this question actually
B